Ürün ayrıntıları
Evde
>
Ürünler
>
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
Ürünler
Bizimle İletişim
|
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
| Adedi: | 1 Takım |
| Fiyat: | 30000-200000USD/set |
| Standart Paketleme: | standart ihracat paketi |
| Teslim süresi: | 40-50 GÜN |
| Ödeme yöntemi: | T/T,L/C |
| Tedarik Kapasitesi: | 30 Takım/Yıl |
Ayrıntılı Bilgiler
Menşe yeri
Çin
Marka adı
CHONGJEN
Sertifika
CE
Model numarası
QS698
Rulo Çalışma Hızı:
1-5(Frekans Dönüşümü)
Hs Kodu:
8424300000
Kesim Alanı:
3000mm*1500mm
Güç Kaynağı:
Elektrik
Çalışma genişliği:
500 - 2000mm
Üretim kapasitesi:
100 TAKIM/YIL
Üretim oranı:
2,0-2,8 ton/saat
Azaltıcı:
Tai Akciğer Grubu Redüktör
Temizleme Türü:
Tekerlek patlama tipi
Menşei:
Çin
Temizleme Hızı:
0.5-5m/dakika
Makine adı:
makaralı konveyör kumlama makinesi
Patlatma tekerleği miktarı:
4-12 adet
Taşıma Paketi:
Köpük, Palet veya Özelleştirilmiş
Pervane Kafası Gücü:
4*11 kW
Konveyorspeed:
Ayarlanabilir
Model numarası:
Q69 serisi
temizleme işlemi:
Kumlama, kumlama
Kontrol sistemi:
Dokunmatik ekran arayüzlü PLC kontrolü
Ürün türü:
makaralı konveyör kumlama makinesi
Ürün Tanımı
Roller Conveyor Shot Blasting Machine for Steel Profile H Beam I Beam Bars
Capabilities and Applications
Designed for all-round surface finishing, the roller conveyor shot blasting machine efficiently descales, derusts and strips old coatings from steel beams, metal sheets and extruded profiles. It also serves as optimal equipment for blast treatment of large intricate mechanical fabrications and welded steel structures.
The complete blasting system is divided into three functional chambers: pre-sealing chamber, main blasting chamber and air washing chamber. Workpieces are conveyed continuously by an inverter-controlled roller bed with an adjustable travel speed of 0.5–4 m/min. Roller dimensions are modified on demand to accommodate maximum workpiece sizes.
The quantity and arrangement of blast turbines and pass openings are customized according to workpiece profiles and measurements. Fabricated from wear-resistant materials, blast wheels with power ratings of 7.5 kW up to 45 kW guarantee reliable high-efficiency blasting performance.
A combination of rotating brushes and high-pressure blowing nozzles installed in the post-cleaning chamber thoroughly clears leftover dust on component surfaces before workpieces exit the machine.
This pass-through blasting equipment can be incorporated into integrated processing lines for steel plates and H-beams, covering cutting, blasting, painting and drying processes in sequence.
A high-performance cartridge dust removal system restricts exhaust dust levels below 30 mg/m³ to meet industrial environmental regulations.
Custom-engineered blasting solutions are available if standard models cannot fulfill your surface preparation criteria.
Technical Specifications
| ITEM / MODEL | QS698 | QS6912 | QS6915 |
|---|---|---|---|
| Workpiece width | <800mm | <1200mm | <1500mm |
| Workpiece height | <400mm | <500mm | <600mm |
| Workpiece length | 1-14m | 1-14m | 1-14m |
| Turbine quantity | 4 | 4 | 4/6 |
| Turbine motor power | 7.5 kw | 7.5 kw/ 11kw | 11kw |
| Roller length | 6m-12m | 6m-12m | 6m-12m |
| Foundation | no pit | no pit | no pit |
| Total power | about 40 kw | about 60 kw | about 100kw |
| Abrasive used | S280, S330 | S280, S330 | S280, S330 |
| Dust collector | Cartridge type | Cartridge type | Cartridge type |
Key Advantages
- Compact design with optional pit or pit-free installation
- Fully customizable configuration based on workpiece geometry and productivity requirements
- Adjustable roller conveyor speed from 0.5m/min to 4m/min
- Touch screen operator interface with integrated PLC, supporting automatic and manual operation modes
- Blasting chamber protected by wear-resistant manganese steel liner with approximately 15,000-hour lifespan
- Series of rubber screens contain abrasive within blasting machine at entry and exit chambers
- Rotary brush and high-pressure blowing fan system removes residual abrasive and dust before workpiece exit
Önerilen Ürünler
Video
Şimdi konuşalım.
Video
Şimdi konuşalım.
Video
