उत्पादों का विवरण
घर
>
उत्पादों
>
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
उत्पादों
हमसे संपर्क करें
|
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
| एमओक्यू: | 1 सेट |
| कीमत: | 30000-200000USD/set |
| स्टैंडर्ड पैकेजिंग: | मानक निर्यात पैकेज |
| वितरण अवधि: | 40-50 दिन |
| भुगतान विधि: | टी/टी, एल/सी |
| आपूर्ति क्षमता: | 30 सेट/वर्ष |
विस्तृत जानकारी
उत्पत्ति के प्लेस
चीन
ब्रांड नाम
CHONGJEN
प्रमाणन
CE
मॉडल संख्या
क्यूएस698
रोलर संचालन गति:
1-5(आवृत्ति रूपांतरण)
एचएस कोड:
8424300000
काटने का क्षेत्र:
3000 मिमी*1500 मिमी
शक्ति का स्रोत:
बिजली
कार्यशीलता:
500 - 2000 मिमी
उत्पादन क्षमता:
100सेट/वर्ष
उत्पादन दर:
2.0-2.8t/H
कम करने:
ताई लंग ग्रुप रिड्यूसर
सफाई का प्रकार:
व्हील ब्लास्ट प्रकार
मूल:
चीन
सफाई की गति:
0.5-5 मीटर/मिनट
मशीन का नाम:
रोलर कन्वेयर शॉट ब्लास्टिंग मशीन
ब्लास्ट व्हील मात्रा:
4-12 पीसी
परिवहन पैकेज:
फोम, पैलेट या अनुकूलित
इम्पेलर हेड पावर:
4*11 किलोवाट
Conveyorspeed:
एडजस्टेबल
प्रतिरूप संख्या:
Q69 श्रृंखला
सफाई प्रक्रिया:
शॉट ब्लास्टिंग, शॉट पीनिंग
नियंत्रण प्रणाली:
टच स्क्रीन इंटरफ़ेस के साथ पीएलसी नियंत्रण
उत्पाद का प्रकार:
रोलर कन्वेयर शॉट ब्लास्टिंग मशीन
उत्पाद का वर्णन
Roller Conveyor Shot Blasting Machine for Steel Profile H Beam I Beam Bars
Capabilities and Applications
Designed for all-round surface finishing, the roller conveyor shot blasting machine efficiently descales, derusts and strips old coatings from steel beams, metal sheets and extruded profiles. It also serves as optimal equipment for blast treatment of large intricate mechanical fabrications and welded steel structures.
The complete blasting system is divided into three functional chambers: pre-sealing chamber, main blasting chamber and air washing chamber. Workpieces are conveyed continuously by an inverter-controlled roller bed with an adjustable travel speed of 0.5–4 m/min. Roller dimensions are modified on demand to accommodate maximum workpiece sizes.
The quantity and arrangement of blast turbines and pass openings are customized according to workpiece profiles and measurements. Fabricated from wear-resistant materials, blast wheels with power ratings of 7.5 kW up to 45 kW guarantee reliable high-efficiency blasting performance.
A combination of rotating brushes and high-pressure blowing nozzles installed in the post-cleaning chamber thoroughly clears leftover dust on component surfaces before workpieces exit the machine.
This pass-through blasting equipment can be incorporated into integrated processing lines for steel plates and H-beams, covering cutting, blasting, painting and drying processes in sequence.
A high-performance cartridge dust removal system restricts exhaust dust levels below 30 mg/m³ to meet industrial environmental regulations.
Custom-engineered blasting solutions are available if standard models cannot fulfill your surface preparation criteria.
Technical Specifications
| ITEM / MODEL | QS698 | QS6912 | QS6915 |
|---|---|---|---|
| Workpiece width | <800mm | <1200mm | <1500mm |
| Workpiece height | <400mm | <500mm | <600mm |
| Workpiece length | 1-14m | 1-14m | 1-14m |
| Turbine quantity | 4 | 4 | 4/6 |
| Turbine motor power | 7.5 kw | 7.5 kw/ 11kw | 11kw |
| Roller length | 6m-12m | 6m-12m | 6m-12m |
| Foundation | no pit | no pit | no pit |
| Total power | about 40 kw | about 60 kw | about 100kw |
| Abrasive used | S280, S330 | S280, S330 | S280, S330 |
| Dust collector | Cartridge type | Cartridge type | Cartridge type |
Key Advantages
- Compact design with optional pit or pit-free installation
- Fully customizable configuration based on workpiece geometry and productivity requirements
- Adjustable roller conveyor speed from 0.5m/min to 4m/min
- Touch screen operator interface with integrated PLC, supporting automatic and manual operation modes
- Blasting chamber protected by wear-resistant manganese steel liner with approximately 15,000-hour lifespan
- Series of rubber screens contain abrasive within blasting machine at entry and exit chambers
- Rotary brush and high-pressure blowing fan system removes residual abrasive and dust before workpiece exit
अनुशंसित उत्पाद
वीडियो
वीडियो
