商品の詳細
ホーム
>
製品
>
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
製品
送信
|
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
| MOQ: | 1セット |
| 価格: | 30000-200000USD/set |
| 標準梱包: | 標準輸出パッケージ |
| 配達期間: | 40-50DAYS |
| 支払方法: | T/T、L/C |
| 供給能力: | 30セット/年 |
詳細情報
起源の場所
中国
ブランド名
CHONGJEN
証明
CE
モデル番号
QS698
ローラー操作速度:
1-5 (周波数変換)
Hsコード:
8424300000
切断エリア:
3000mm*1500mm
電源:
電気
作業幅:
500〜2000mm
生産能力:
100SETS/YEAR
生産率:
2.0-2.8t/H
減速機:
Tai Lung グループ レデューサ
洗浄タイプ:
ホイールブラストタイプ
起源:
中国
洗浄速度:
0.5〜5m/min
マシン名:
ローラーコンベアショットブラスト機
バストホイールの量:
4-12 PC
輸送パッケージ:
泡,パレット,またはカスタマイズ
インペラーヘッドの電源:
4*11kw
輸送機速度:
調整可能
モデル番号:
Q69シリーズ
洗浄工程:
ショットブラスト、ショットピーニング
制御システム:
触覚画面インターフェースによるPLC制御
製品タイプ:
ローラーコンベアショットブラスト機
製品の説明
Roller Conveyor Shot Blasting Machine for Steel Profile H Beam I Beam Bars
Capabilities and Applications
Designed for all-round surface finishing, the roller conveyor shot blasting machine efficiently descales, derusts and strips old coatings from steel beams, metal sheets and extruded profiles. It also serves as optimal equipment for blast treatment of large intricate mechanical fabrications and welded steel structures.
The complete blasting system is divided into three functional chambers: pre-sealing chamber, main blasting chamber and air washing chamber. Workpieces are conveyed continuously by an inverter-controlled roller bed with an adjustable travel speed of 0.5–4 m/min. Roller dimensions are modified on demand to accommodate maximum workpiece sizes.
The quantity and arrangement of blast turbines and pass openings are customized according to workpiece profiles and measurements. Fabricated from wear-resistant materials, blast wheels with power ratings of 7.5 kW up to 45 kW guarantee reliable high-efficiency blasting performance.
A combination of rotating brushes and high-pressure blowing nozzles installed in the post-cleaning chamber thoroughly clears leftover dust on component surfaces before workpieces exit the machine.
This pass-through blasting equipment can be incorporated into integrated processing lines for steel plates and H-beams, covering cutting, blasting, painting and drying processes in sequence.
A high-performance cartridge dust removal system restricts exhaust dust levels below 30 mg/m³ to meet industrial environmental regulations.
Custom-engineered blasting solutions are available if standard models cannot fulfill your surface preparation criteria.
Technical Specifications
| ITEM / MODEL | QS698 | QS6912 | QS6915 |
|---|---|---|---|
| Workpiece width | <800mm | <1200mm | <1500mm |
| Workpiece height | <400mm | <500mm | <600mm |
| Workpiece length | 1-14m | 1-14m | 1-14m |
| Turbine quantity | 4 | 4 | 4/6 |
| Turbine motor power | 7.5 kw | 7.5 kw/ 11kw | 11kw |
| Roller length | 6m-12m | 6m-12m | 6m-12m |
| Foundation | no pit | no pit | no pit |
| Total power | about 40 kw | about 60 kw | about 100kw |
| Abrasive used | S280, S330 | S280, S330 | S280, S330 |
| Dust collector | Cartridge type | Cartridge type | Cartridge type |
Key Advantages
- Compact design with optional pit or pit-free installation
- Fully customizable configuration based on workpiece geometry and productivity requirements
- Adjustable roller conveyor speed from 0.5m/min to 4m/min
- Touch screen operator interface with integrated PLC, supporting automatic and manual operation modes
- Blasting chamber protected by wear-resistant manganese steel liner with approximately 15,000-hour lifespan
- Series of rubber screens contain abrasive within blasting machine at entry and exit chambers
- Rotary brush and high-pressure blowing fan system removes residual abrasive and dust before workpiece exit
推奨する製品
ビデオ
ビデオ
ビデオ
