제품 세부 정보
집
>
상품
>
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
상품
문의하기
|
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
| MOQ: | 1세트 |
| 가격: | 30000-200000USD/set |
| 표준 포장: | 표준 수출 패키지 |
| 배송 기간: | 40-50DAYS |
| 결제 방법: | T/T,L/C |
| 공급능력: | 30 세트/년 |
상세 정보
원래 장소
중국
브랜드 이름
CHONGJEN
인증
CE
모델 번호
QS698
롤러 작동 속도:
1-5(주파수 변환)
Hs 코드:
8424300000
절단 영역:
3000mm*1500mm
전원:
전기
작업 폭:
500~2000mm
생산능력:
100SETS/YEAR
생산 속도:
2.0-2.8톤/시간
감속기:
타이렁 그룹 감속기
청소 유형:
휠 블래스트 유형
기원:
중국
청소 속도:
0.5-5m/분
기계 이름:
롤러 컨베이어 쇼트 블라스팅 머신
블래스트 휠 수량:
4-12 PC
운송 패키지:
폼, 팔레트 또는 맞춤형
임펠러 헤드 파워:
4*11kw
컨베이어 스피드:
조절할 수 있는
모델 번호:
Q69 시리즈
청소 과정:
쇼트블라스팅, 쇼트피닝
제어 시스템:
터치스크린 인터페이스를 통한 PLC 제어
제품 유형:
롤러 컨베이어 쇼트 블라스팅 머신
제품 설명
Roller Conveyor Shot Blasting Machine for Steel Profile H Beam I Beam Bars
Capabilities and Applications
Designed for all-round surface finishing, the roller conveyor shot blasting machine efficiently descales, derusts and strips old coatings from steel beams, metal sheets and extruded profiles. It also serves as optimal equipment for blast treatment of large intricate mechanical fabrications and welded steel structures.
The complete blasting system is divided into three functional chambers: pre-sealing chamber, main blasting chamber and air washing chamber. Workpieces are conveyed continuously by an inverter-controlled roller bed with an adjustable travel speed of 0.5–4 m/min. Roller dimensions are modified on demand to accommodate maximum workpiece sizes.
The quantity and arrangement of blast turbines and pass openings are customized according to workpiece profiles and measurements. Fabricated from wear-resistant materials, blast wheels with power ratings of 7.5 kW up to 45 kW guarantee reliable high-efficiency blasting performance.
A combination of rotating brushes and high-pressure blowing nozzles installed in the post-cleaning chamber thoroughly clears leftover dust on component surfaces before workpieces exit the machine.
This pass-through blasting equipment can be incorporated into integrated processing lines for steel plates and H-beams, covering cutting, blasting, painting and drying processes in sequence.
A high-performance cartridge dust removal system restricts exhaust dust levels below 30 mg/m³ to meet industrial environmental regulations.
Custom-engineered blasting solutions are available if standard models cannot fulfill your surface preparation criteria.
Technical Specifications
| ITEM / MODEL | QS698 | QS6912 | QS6915 |
|---|---|---|---|
| Workpiece width | <800mm | <1200mm | <1500mm |
| Workpiece height | <400mm | <500mm | <600mm |
| Workpiece length | 1-14m | 1-14m | 1-14m |
| Turbine quantity | 4 | 4 | 4/6 |
| Turbine motor power | 7.5 kw | 7.5 kw/ 11kw | 11kw |
| Roller length | 6m-12m | 6m-12m | 6m-12m |
| Foundation | no pit | no pit | no pit |
| Total power | about 40 kw | about 60 kw | about 100kw |
| Abrasive used | S280, S330 | S280, S330 | S280, S330 |
| Dust collector | Cartridge type | Cartridge type | Cartridge type |
Key Advantages
- Compact design with optional pit or pit-free installation
- Fully customizable configuration based on workpiece geometry and productivity requirements
- Adjustable roller conveyor speed from 0.5m/min to 4m/min
- Touch screen operator interface with integrated PLC, supporting automatic and manual operation modes
- Blasting chamber protected by wear-resistant manganese steel liner with approximately 15,000-hour lifespan
- Series of rubber screens contain abrasive within blasting machine at entry and exit chambers
- Rotary brush and high-pressure blowing fan system removes residual abrasive and dust before workpiece exit
권장 제품
화면
지금 챗팅하세요
화면
지금 챗팅하세요
화면
화면
