rincian produk
Rumah
>
Produk
>
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
Produk
Hubungi Kami
|
Roller conveyor shot blasting machine with adjustable speed PLC control and wear-resistant manganese steel liner for steel profiles
| MOQ: | 1 Set |
| Harga: | 30000-200000USD/set |
| Kemasan Standar: | paket standar ekspor |
| Periode Pengiriman: | 40-50 HARI |
| metode pembayaran: | T/T,L/C |
| Kapasitas Pasokan: | 30 Set/Tahun |
Informasi Rinci
Tempat asal
Cina
Nama merek
CHONGJEN
Sertifikasi
CE
Nomor model
QS698
Kecepatan Operasi Roller:
1-5 (Konversi Frekuensi)
Kode Hs:
8424300000
Daerah Pemotongan:
3000mm*1500mm
Sumber Daya:
Listrik
Lebar Kerja:
500 - 2000 mm
Kapasitas Produksi:
100 SET/TAHUN
Tingkat produksi:
2,0-2,8 ton/jam
Peredam:
Peredam Grup Tai Lung
Jenis Pembersihan:
Jenis ledakan roda
Asal:
Cina
Kecepatan Pembersihan:
0,5-5m/mnt
Nama mesin:
mesin peledakan tembakan konveyor rol
Kuantitas roda ledakan:
4-12 buah
Paket Transportasi:
Busa, Palet atau Disesuaikan
Tenaga Kepala Impeler:
4*11kw
Conveyororspeed:
Dapat disesuaikan
Nomor Model:
Seri Q69
proses pembersihan:
Tembakan peledakan, tembakan peening
Sistem kendali:
Kontrol PLC dengan antarmuka layar sentuh
Jenis produk:
mesin peledakan tembakan konveyor rol
Deskripsi Produk
Roller Conveyor Shot Blasting Machine for Steel Profile H Beam I Beam Bars
Capabilities and Applications
Designed for all-round surface finishing, the roller conveyor shot blasting machine efficiently descales, derusts and strips old coatings from steel beams, metal sheets and extruded profiles. It also serves as optimal equipment for blast treatment of large intricate mechanical fabrications and welded steel structures.
The complete blasting system is divided into three functional chambers: pre-sealing chamber, main blasting chamber and air washing chamber. Workpieces are conveyed continuously by an inverter-controlled roller bed with an adjustable travel speed of 0.5–4 m/min. Roller dimensions are modified on demand to accommodate maximum workpiece sizes.
The quantity and arrangement of blast turbines and pass openings are customized according to workpiece profiles and measurements. Fabricated from wear-resistant materials, blast wheels with power ratings of 7.5 kW up to 45 kW guarantee reliable high-efficiency blasting performance.
A combination of rotating brushes and high-pressure blowing nozzles installed in the post-cleaning chamber thoroughly clears leftover dust on component surfaces before workpieces exit the machine.
This pass-through blasting equipment can be incorporated into integrated processing lines for steel plates and H-beams, covering cutting, blasting, painting and drying processes in sequence.
A high-performance cartridge dust removal system restricts exhaust dust levels below 30 mg/m³ to meet industrial environmental regulations.
Custom-engineered blasting solutions are available if standard models cannot fulfill your surface preparation criteria.
Technical Specifications
| ITEM / MODEL | QS698 | QS6912 | QS6915 |
|---|---|---|---|
| Workpiece width | <800mm | <1200mm | <1500mm |
| Workpiece height | <400mm | <500mm | <600mm |
| Workpiece length | 1-14m | 1-14m | 1-14m |
| Turbine quantity | 4 | 4 | 4/6 |
| Turbine motor power | 7.5 kw | 7.5 kw/ 11kw | 11kw |
| Roller length | 6m-12m | 6m-12m | 6m-12m |
| Foundation | no pit | no pit | no pit |
| Total power | about 40 kw | about 60 kw | about 100kw |
| Abrasive used | S280, S330 | S280, S330 | S280, S330 |
| Dust collector | Cartridge type | Cartridge type | Cartridge type |
Key Advantages
- Compact design with optional pit or pit-free installation
- Fully customizable configuration based on workpiece geometry and productivity requirements
- Adjustable roller conveyor speed from 0.5m/min to 4m/min
- Touch screen operator interface with integrated PLC, supporting automatic and manual operation modes
- Blasting chamber protected by wear-resistant manganese steel liner with approximately 15,000-hour lifespan
- Series of rubber screens contain abrasive within blasting machine at entry and exit chambers
- Rotary brush and high-pressure blowing fan system removes residual abrasive and dust before workpiece exit
Produk yang Direkomendasikan
Video
Video
Video
