Ürün ayrıntıları
Evde
>
Ürünler
>
Roller Conveyor Shot Blasting Machine suitable for removing rust paint and scale from metal sheets steel profiles and structural beams
Ürünler
Bizimle İletişim
|
Roller Conveyor Shot Blasting Machine suitable for removing rust paint and scale from metal sheets steel profiles and structural beams
| Adedi: | 1 Takım |
| Fiyat: | 30000-200000USD/set |
| Standart Paketleme: | standart ihracat paketi |
| Teslim süresi: | 40-50 GÜN |
| Ödeme yöntemi: | T/T,L/C |
| Tedarik Kapasitesi: | 30 Takım/Yıl |
Ayrıntılı Bilgiler
Menşe yeri
Çin
Marka adı
CHONGJEN
Sertifika
CE
Model numarası
QS698
Rulo Çalışma Hızı:
1-5(Frekans Dönüşümü)
Toz emisyonu:
Daha az 20mg/m3
Konveyör tipi:
Makaralı konveyör
Ürün adı:
makaralı konveyör kumlama makinesi
İş Parçası Genişliği:
800 mm
Kullanılan endüstri:
Çelik ürünleri temizliği
Ürün Rengi:
Özelleştirilebilir
Hs Kodu:
8424300000
Kesim Alanı:
3000mm*1500mm
Güç Kaynağı:
Elektrik
Çalışma genişliği:
500 - 2000mm
Üretim kapasitesi:
100 TAKIM/YIL
Üretim oranı:
2,0-2,8 ton/saat
Azaltıcı:
Tai Akciğer Grubu Redüktör
Temizleme Türü:
Tekerlek patlama tipi
Menşei:
Çin
Temizleme Hızı:
0.5-5m/dakika
Ürün Tanımı
Roller Conveyor Shot Blasting Machine for Steel Profile H Beam I Beam Bars
Capabilities and Applications
The roller conveyor shot blasting machine is professionally developed for full-scale surface pretreatment. It thoroughly eliminates rust, oxide scale and old paint from steel beams, metal plates and sectional profiles, and is also well-suited for cleaning oversized complex mechanical assemblies and welded steel frameworks.
The sophisticated blasting unit consists of three independent functional zones: inlet pre-chamber, blasting chamber and post-cleaning chamber. Driven by a frequency converter, the variable-speed roller conveyor continuously transports workpieces at adjustable speeds ranging from 0.5 m/min to 4 m/min. Roller lengths can be customized to fit the maximum size of your workpieces.
The layout of blast wheels and through passages is precisely configured to match the geometry and size of processed parts. Made of wear-resistant alloys, these blast turbines cover power outputs between 7.5 kW and 45 kW and deliver powerful, consistent blasting effects.
Inside the cleaning chamber, rotary brushes paired with high-pressure air blow nozzles strip residual abrasive dust off workpiece surfaces prior to discharge.
This roller pass-through blaster supports seamless integration into full automatic production lines covering steel plate or beam cutting, blasting, coating and drying workflows.
Equipped with a premium cartridge dust collector, the equipment keeps dust discharge concentration under 30 mg/m³ to satisfy environmental protection standards.
Should standard specifications fail to match your surface treatment demands, we provide fully customized shot blasting machine designs built around your unique production conditions.
Technical Specifications
| ITEM / MODEL | QS698 | QS6912 | QS6915 |
|---|---|---|---|
| Workpiece width | <800mm | <1200mm | <1500mm |
| Workpiece height | <400mm | <500mm | <600mm |
| Workpiece length | 1-14m | 1-14m | 1-14m |
| Turbine quantity | 4 | 4 | 4/6 |
| Turbine motor power | 7.5 kw | 7.5 kw/ 11kw | 11kw |
| Roller length | 6m-12m | 6m-12m | 6m-12m |
| Foundation | no pit | no pit | no pit |
| Total power | about 40 kw | about 60 kw | about 100kw |
| Abrasive used | S280, S330 | S280, S330 | S280, S330 |
| Dust collector | Cartridge type | Cartridge type | Cartridge type |
Key Advantages
- Compact design with optional pit or pit-free installation
- Fully customizable configuration based on workpiece geometry and productivity requirements
- Adjustable roller conveyor speed from 0.5m/min to 4m/min
- Touch screen operator interface with integrated PLC, supporting automatic and manual operation modes
- Blasting chamber protected by wear-resistant manganese steel liner with approximately 15,000-hour lifespan
- Series of rubber screens contain abrasive within blasting machine at entry and exit chambers
- Rotary brush and high-pressure blowing fan system removes residual abrasive and dust before workpiece exit
Önerilen Ürünler
Video
Şimdi konuşalım.
Video
Şimdi konuşalım.
Video
