|
Manual Sand Blasting Booth With Automatic Abrasive Recycling System Dust Removal System
| MOQ: | 1 |
| Price: | 20000-200000USD/set |
| Standard Packaging: | Export package |
| Delivery Period: | 60days |
| Payment Method: | T/T |
| Supply Capacity: | 36sets/year |
Manual sand blasting booth
,6 bar sand blasting booth
,Stripping shot blast booth
The floor scraper sand blasting room (also referred to as floor conveyor sand blasting room) is a professional surface treatment equipment integrated with sand blasting operation space, dust removal system, abrasive recycling & conveying system and floor scraper conveying mechanism. It is designed for batch surface treatment of workpieces, realizing automatic conveying of workpieces and cyclic utilization of abrasives, and is widely used in industrial metal surface treatment. Below is a detailed introduction to its core capabilities, typical applications, common models and key specifications.
The floor scraper sand blasting room is optimized for automation, efficiency and environmental protection based on the traditional sand blasting room, with the following core functional capabilities:
- Integrated Surface Treatment
Achieve high-precision sand blasting derusting, descaling, paint removal, deburring, surface roughening (for coating adhesion promotion) and oxide skin cleaning of metal workpieces; applicable to both ferrous and non-ferrous metal workpieces (steel, aluminum, copper, alloy, etc.).
- Automatic Workpiece Conveying
The built-in floor scraper conveyor (scraper chain) drives the workpiece to move stably through the sand blasting operation zone at a controllable speed, realizing continuous/batch sand blasting without manual handling of workpieces, greatly reducing labor intensity.
- Efficient Abrasive Recycling & Circulation
The scraper mechanism at the bottom of the room collects the used abrasives (quartz sand, steel grit, steel shot, ceramic sand, etc.) and conveys them to the screening and dust removal unit; after screening out impurities (rust, paint slag, dust) and drying, the qualified abrasives are transported back to the sand blasting gun for cyclic use, with an abrasive recycling rate of up to 90% and above.
- High-standard Dust & Fume Collection
Equipped with a dedicated pulse bag-type dust removal system (or cartridge dust remover) with a dust collection efficiency of ≥99.9%, which captures the dust generated during sand blasting in real time, meets industrial environmental protection emission standards (no dust overflow), and ensures a clean operation environment for workers.
- Controllable Sand Blasting Intensity
The sand blasting pressure, gun position, number of sand blasting guns and workpiece conveying speed can be adjusted independently, adapting to surface treatment requirements of different workpieces (e.g., light deburring for precision parts, heavy derusting for large steel structural parts).
- Safe & Reliable Operation Protection
With interlock protection (door-gun interlock, overload protection), explosion-proof design (for flammable workpiece treatment), emergency stop button and ventilation & air exchange system; the operation room is equipped with protective glass and anti-sand blasting wear-resistant lining (rubber, steel plate) to extend equipment service life.
- Low Energy Consumption & Easy Maintenance
The abrasive circulation system adopts energy-saving transmission components, and key parts (scraper chain, sand blasting gun, dust removal filter element) are modular designed for quick disassembly, replacement and daily maintenance.
| ITEM / MODEL | Q2635 | Q2646 | Q2656 | Q2658 | Q2660 |
|---|---|---|---|---|---|
| Chamber width | 3000mm | 4000mm | 5000mm | 5000mm | 6000mm |
| Chamber length | 5000mm | 6000mm | 6000mm | 8000mm | 10000mm |
| Chamber height | 3000mm | 4000mm | 4000mm | 5000mm | 5000mm |
| Cart size | 1000x2000mm | 1200x3000mm | 1500x3000mm | 1500x5000mm | 2000x6000mm |
| Cart loading capacity | 2 ton | 5 ton | 5 ton | 5 ton | 10 ton |
| Pit depth | No pit | No pit | 400mm | 400mm | 400mm |
| Compressed air require | 6 Nm3/min | 6 Nm3/min | 6 Nm3/min | 6 Nm3/min | 12 Nm3/min |
| Exhaust fan air volume | 3500 m3/hr | 5000 m3/hr | 7500 m3/hr | 11000 m3/hr | 15000 m3/hr |
| Dust collector | Cartridge type | Cartridge type | Cartridge type | Cartridge type | Cartridge type |
| Floor recovery system | Pneumatic | Floor scraper | Floor scraper | Floor scraper | Floor scraper |
This equipment is suitable for mass production lines and batch surface treatment in various industries, especially for workpieces with regular shapes, moderate size and continuous processing requirements. Typical application fields include:
- Automotive & Auto Parts Industry
Surface treatment of auto chassis, wheel hubs, engine parts, frame, sheet metal parts; derusting and paint removal of auto maintenance parts.
- Construction Machinery & Heavy Equipment Industry
Sand blasting treatment of excavator, loader, crane structural parts, metal brackets, hydraulic cylinder parts; pre-coating surface roughening of engineering machinery accessories.
- Sheet Metal & Steel Structure Industry
Batch derusting and paint removal of steel plates, profiles, steel pipes, light steel structures, container parts and metal doors/windows.
- Hardware & Mechanical Parts Industry
Deburring and surface polishing of standard parts, fasteners, gears, bearings, pump valves and hydraulic parts.
- Aerospace & Rail Transit Industry
Precision surface treatment of small and medium-sized aerospace accessories, railway vehicle parts (axle box, connecting rod), subway sheet metal parts (derusting and pre-coating treatment).
- Shipbuilding & Marine Engineering Industry
Surface treatment of small and medium-sized ship accessories (hull parts, marine fasteners, pipe fittings) and offshore platform metal components.
- General Manufacturing
Paint removal and refurbishment of used mechanical equipment, surface treatment of metal molds, roughening of casting and forging parts.
