Fully Automatic Shot Blasting Machine, Practical Operation Beginner's Guide

Incorrect shot blasting machine operation causes inefficiency; this guide teaches standard shot blasting steps.

This guide helps beginners master full-automatic shot blasting machine operation, including shot blasting steps and key precautions.

Learn shot blasting machine operation steps and shot blasting key points below.

Step 1: Pre-Operation Preparation for Shot Blasting Machine

Pre-operation preparation is the foundation of safe and efficient shot blasting, and it is crucial to check the full-automatic shot blasting machine thoroughly before starting shot blasting.

• First, inspect the shot blasting machine’s power supply, ensuring the circuit is connected correctly and there is no leakage, which is a basic safety guarantee for shot blasting.
• Second, check the abrasive amount in the shot blasting machine: ensure the abrasive is sufficient and free of impurities, as insufficient or contaminated abrasive will affect the effect of shot blasting.
• Third, inspect the shot blasting machine’s key components, such as the blast wheel, conveyor belt, and dust removal system, to confirm they are in good condition without loose or worn parts.
• Fourth, wear professional protective equipment, including anti-impact goggles, gloves, and dust masks, to avoid injury during shot blasting.

Finally, familiarize yourself with the shot blasting machine’s control panel, understanding the function of each button to ensure correct operation during shot blasting. Proper pre-operation preparation not only protects the shot blasting machine but also ensures the safety and effect of shot blasting.

Step 2: Standard Operation Process of Shot Blasting Machine

Mastering the standard operation process of the shot blasting machine is key to achieving high-quality shot blasting and extending the service life of the shot blasting machine.

• First, place the workpiece to be processed on the conveyor belt of the shot blasting machine, ensuring it is fixed firmly to avoid displacement during shot blasting, which may affect the shot blasting effect or cause safety hazards.
• Second, close the shot blasting machine’s chamber door tightly and confirm the door is locked to prevent abrasive splashing during shot blasting.
• Third, turn on the shot blasting machine’s power switch, start the dust removal system first, then start the conveyor belt and blast wheel in sequence, ensuring each component operates normally before starting shot blasting. During shot blasting, observe the operation status of the shot blasting machine in real time, check the shot blasting effect, and adjust parameters such as abrasive flow and conveyor speed if necessary to ensure uniform shot blasting. After shot blasting is completed, turn off the blast wheel first, then turn off the conveyor belt and dust removal system in sequence.

Finally, open the chamber door, take out the workpiece, and clean the shot blasting machine’s chamber and conveyor belt to remove residual abrasive and debris, preparing for the next shot blasting operation.

Conclusion

Follow steps and precautions to operate shot blasting machine and shot blasting safely.

For more details about shot blasting machine operation and shot blasting,

email: henry.cheng@chjmachinery.com